priomold GmbH

< Back

SLS 3D printing with PA12+flame retardant (PA2210FR)

The PA2210FR laser sintering material from EOS GmbH is a white PA12 that has been mixed with a halogen-free flame retardant. SLS 3D printed components made from this PA12FR comply with fire protection class UL94 / V-0 from a wall thickness of 3 mm and have Blue Card certification. In addition, laser-sintered components made from this material comply with aviation directive FAR 25.853 and are therefore ideally suited for use in aircraft. Thanks to the excellent fire behavior of PA2210FR, 3D-printed components made from this material are also used in the electrical engineering and electronics industries.

At a glance	Optional finishing
With flame retardant Suitable for aviation applications Suitable for use in electrical engineering Blue-Card certified UL94 / V-0 compliant from 3 mm wall thickness Durable Good mechanical properties	Chemical polishing Vibratory grinding Dye colouring Water or gas-tight infiltration Mechanical finishing Pad printing Coating

Technical data PA2210FR

Color	white
Tensile modulus (x-y-plane) [MPa]	2500
Tensile strength (x-y-plane) [MPa]	46
Elongation at break (x-y-plane) [%]	4
Melting temperature (20 °C/min) [°C]	185
Heat deflection temperature (1.80 MPa) [°C]	84
Heat deflection temperature (0.45 MPa) [°C]	154
Density kg/m³]	1060
Manufacturer	EOS GmbH